ZTE ZXHN E2633 flashing firmware [free]

Jul 25, 20232896

AI Translation

This post is translated from Chinese into English through AI.View Original

AI-generated summary

The user's carrier-locked phone prompted them to find firmware online. They found free firmware for the ZXHN-E2633 model and proceeded to flash it. They were advised to reset the phone to factory settings before downloading the firmware. The firmware can be downloaded from two different links. After flashing the firmware, the user should access the default management address and upload the firmware upgrade. They should be cautious not to disconnect the power during the upgrade process. After about 3 minutes, a new WiFi network will appear with the name CMCC-XXXX and the gateway address will change to http://192.168.5.1. The management password can be found on the router sticker. The user should access this address and change the WiFi name to match the one on the router sticker. They can use the ZTE Smart Life app to connect to the CMCC-XXXX WiFi network for binding and then proceed with further settings. If the instructions are not clear, the user can try resetting the phone and repeating the process three times.

Because my carrier-customized phone is locked, I found firmware online. All the following firmware is free.

Please confirm that your model is ZXHN-E2633. Once you flash the firmware, there is no way to revert it, so please decide for yourself.

Start flashing the firmware#

Please restore the factory settings first.
Download the firmware.

https://www.123pan.com/s/SV58Vv-7dtov.html

https://goojoe.lanzoul.com/iaiT313gjc4b

For Lanzou Cloud, you need to unzip the zip file yourself. The firmware for flashing should have the .bin extension.

Access the default management address http://192.168.10.1

Simply upload the firmware upgrade for flashing.

Note: Do not power off during the upgrade, as it may brick the device.

After about 3 minutes, a WIFI named CMCC-XXXX will appear. At this time, the gateway address has been changed to http://192.168.5.1. The management password is on the sticker of your router. Access this address and change the WIFI name to the name on the sticker of your router. Changing to a different name may cause failure. You can use the ZTE Smart Life app to connect to the CMCC-XXXX WIFI for binding, and then proceed with the reconfiguration.
I'm not sure about the subsequent instructions. If it still doesn't work, you can try poking the RESET button and then access http://192.168.5.1 three times to repeat the process.